Serving since 2003      

RigExpert AA-600, AA-1000 and AA-1400 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.


Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.


Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-600, AA-1000 and AA-1400 attractive for professionals and hobbyists.


AA-600, AA-1000 and AA-1400 are available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead).


The following tasks are easily accomplished by using these analyzers:


  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
  • Making coaxial lines or measuring their parameters
  • Cable testing and fault location
  • Measuring capacitance or inductance of reactive loads


Specification


Frequency range: 0.1 to 1000 MHz – AA-1000


Frequency entry: 1 kHz resolution


Measurement: for 25, 50, 75 and 100-Ohm systems


SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode


SWR display: numerical or easily-readable bar


R and X range: 0…10000, -10000…10000 in numerical mode, 0…1000, -1000…1000 in graph mode


Display modes:

–    SWR at single or multiple frequencies

–    SWR, return loss, R, X, Z, L, C at single frequency

–    SWR graph, 80 points

–    R, X graph, 80 points

–    Smith (or polar) chart, 80 points

–    TDR (Time Domain Reflectometer) graph


Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.


RF output:

–    Connector type: N

–    Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.

–    Output power: -10 dBm (at 50 Ohm load)


Power:

–    Three 1.5V, alcaline batteries, type AA *

–    Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA

–    Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used

–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources


Interface:

–    320×240 color TFT displaty

–    6×3 keys on the water-proof keypad

–    Multilingual menus and help screens

–    USB connection to a personal computer


Dimensions: 23x10x5.5 cm (9x4x2”)


Operating temperature: 0…40 °C (32…104 °F)


Weight: 650g (23 Oz)


Warranty: 2 years


GTIN-13: 4820185420044


RigExpert AA-1000 is made in Ukraine.

Specifications are subject to change without notice.

* Batteries are not included with the analyzer.

Write a review

Note: HTML is not translated!
    Bad           Good

RigExpert AA-1000

  • Brands RigExpert
  • Product Code: RigExpert AA-1000
  • Availability: In Stock
  • US $895.00
  • US $745.95


Tags: AA-1000