Serving since 2003      

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.

A built-in ZOOM capability makes graphical measurements especially effective. 

An integrated Time Domain Reflectometer mode can be used to locate the precise location of a fault within the feed line system. 

The following tasks are easily accomplished by using this analyzer:

 

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable testing and fault location, measuring cable loss and characteristic impedance
  • Measuring capacitance or inductance of reactive load


Specification


Frequency range: 0.1 to 230 MHz


Frequency entry: 1 kHz resolution


Measurement for: 25, 50, 75 and 100-Ohm systems


SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes


SWR display: numerical or analog indicator


R and X range: 0…10000, -10000…10000 in numerical modes, 0…1000, -1000…1000 in chart modes


Display modes:

–    SWR at single or multiple frequencies

–    SWR, return loss, R, X, Z, L, C at single frequency

–    SWR chart, 20 to 500 points

–    R, X chart, 20 to 500 points

–    Smith chart, 20 to 500 points

–    Return loss chart, 20 to 500 points

–    TDR (Time Domain Reflectometer) chart

–    Cable tools (loss and characteristic impedance)


Optional open-short-load calibration.


Non Volatile memory:

– 100 slots to save measurement results


RF output:

–    Connector type: N

–    Output signal shape: square

–    Output power: -10 dBm (at 50 Ohm load)


Power:

–    Four 1.5V alkaline batteries, type AAA

–    Four 1.2V Ni-MH batteries, type AAA *

–    Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used

–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources


Interface:

–    290×220 color TFT display

–    6×3 keys on the water-proof keypad

–    Multilingual menus and help screens

–    USB connection to a personal computer


Dimensions: 82 x 182 x 32 mm (3.2 x 7.2 x 1.3 in)


Operating temperature: 0…40 °C (32…104 °F)


Weight: 236 g (8.32 oz)


Warranty: 2 years


GTIN-13: 4820185420082


RigExpert AA-230 ZOOM is made in Ukraine.

Specifications are subject to change without notice.

* Batteries are not included with the analyzer.

Write a review

Note: HTML is not translated!
    Bad           Good

RigExpert AA-230 ZOOM

  • Product Code: AA-230 ZOOM
  • Availability: In Stock
  • US $549.00
  • US $428.95